Roof Replacement Dumpster Checklist for Cherry Hill, NJ

A roof tear-off is one of the more predictable jobs to size, once you know the one fact that trips most people up: shingles are dense, and a roofing load hits its weight limit long before the container looks anywhere near full.

Why roofing debris is deceptively heavy

A layer of asphalt shingles across an average-size roof weighs several tons before you add underlayment, flashing, and any decking replaced along the way. That's why a container that looks small — a 10 or 15 yard — is very often the correct size for a roofing job, while the same container would look empty holding a garage cleanout's worth of furniture.

Sizing by layer count

A single layer of shingles on an average Cherry Hill-area home typically fits a 10 or 15 yard. A two-layer tear-off — common on older homes that were re-roofed over an existing layer rather than stripped first — roughly doubles the weight, and usually needs a 20 yard instead. If you're not sure how many layers are on your roof, your roofer will know, or a quick look from the ground often tells you.

Timing around a nor'easter

After a significant South Jersey nor'easter or wind event, roofing crews across Camden County get busy fast, and dumpster availability tightens right along with it. If your roofer has given you a start date, call for the container as soon as you have that date — not the morning work is scheduled to begin.

What else typically goes in with the shingles

Underlayment, old flashing, damaged decking boards if they're being replaced, and sometimes old gutters if that work is happening at the same time. All of this is fine mixed in with the shingles — it's genuinely part of the same job.

What doesn't belong in a roofing container

Liquid roofing tar, adhesives and solvents are excluded the same as any other hazardous liquid. And if the job also involves unrelated heavy debris — like a concrete chimney cap coming down — flag that separately, since it changes the weight math.

The bottom line before you book

Tell us the roof's approximate size and the layer count, and we'll size it accurately the first time — which matters more on a roofing job than almost any other category, since undersizing means a mid-project swap while a crew is standing around waiting.